Lencore Spectra i.Net: Sound Manager - Manual (Page 23)

2.2.1.1. ADDING a Sound Masking Group
1. Click on the Sound Masking tab in the “Groups” section of the Manual
Adjustments area.
2. Click on the “+” symbol in the “Groups” section to add a group as shown in
Figure 6 below.
Figure 6
3. When prompted in the Popup window to enter a group name, enter the
desired group name and click Enter to save as shown in Figure 7 below. It is
NOT recommended to have more than one group with the same name.
Figure 7
4. You will now see the newly created group displayed in the “Groups” area
as shown in Figure 8.
NOTE: Once created, you will NOT be able to edit the group name. To
change or edit the name you would have to delete the group, and re-create
the group under a different name.
The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be copied,
used or distributed without prior authorization from Lencore Acoustics Corp. © Copyright 2010 20
V 1.9