Lencore Spectra i.Net: Sound Manager - Manual (Page 15)

7. Spectra i.Net
®
Sound Manager
Diagnostics Screen
In this area of the
Sound Manager you
can perform a 1KHz
tone test on the
system and perform
global diagnostics of
the system status,
memory, DSP and
neuron performance.
You can also reset
factory or OP settings
in this area.
NOTE: CLICK REFRESH OPs BEFORE PERFORMING GLOBAL DIAGNOSTICS
To Exit the Sound Manager
Once you make any changes, you must hit the submit button to execute the changes.
When you have made all of your adjustments and submitted them, hit the X to get out of
the Sound Manager.
Choose Log off to exit the i.LON you will return to an error screen it is now safe to
remove the Cat 5e from the i.LON 10/100 base T and your computer.
*Refer to PART B for step-by-step instructions on using Lencore Sound
Manual Adjustments, Timer functions and Manager’s Diagnostics.
The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be copied,
used or distributed without prior authorization from Lencore Acoustics Corp. © Copyright 2010 12
V 1.9