Directed Electronics 3000 - Manual (Page 30)

27 © 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d
system resets the one hour timer. If one hour passes and the zone has
not triggered again, the zone is activated and can trigger the system
again. NPC ® monitors sensor inputs and the door trigger. If NPC ® is
turned off, the system will respond to repeated triggers on the sensor
inputs and will do so indefinitely. Some states have laws regulating how
many times a security system can trigger before it is considered a nui-
sance and the vehicle is towed away.
remote valet on/off
This feature allows you to set remote Valet on or off.
reset to default
This feature allows you to restore the programming to factory defaults,
except for the PIN code and remote controls programmed into the system.
user selectable features descriptions - column three
The features in this column pertain to programming individual remote
channels in custom configurations. Following is an explanation of the
features. To program specific functions to a different button, enter the
function you are programming after the chirp confirmation. Press the
button with which you wish to control that feature; the system will
chirp to confirm that it has learned the new button.
arm/disarm only
z The remote control channel programmed into this feature
will arm/disarm the system only.