Directed Electronics 3000 - Manual (Page 21)

18 © 2 0 0 5 d i re c t e d e l e c t ro n i c s , a l l r i g h t s re s e r v e d
table of zones
The zone number is the number of LED flashes used by the system to
identify a specific input. The standard input assignments are listed
below, along with spaces to write in any optional sensors or switches
you have had installed. If a Warning Zone response is triggered, the LED
will not report it.
anti-code grabbing (ACG)
This unit features Anti-Code Grabbing (ACG) with Random Code
Encryption. This means the receiver and remotes each use a mathemati-
cal formula called an algorithm to change their code each time the
remote is used. This technology has been developed to increase the secu-
rity of the unit. The control unit knows what the next codes should be.
Zone - Number Dealer-Installed
of LED Flashes Description Options
1 Tilt Sensor
(Built-in Tilt Sensor)
2 Auxiliary sensor 1
input
3 Auxiliary sensor 2
input
4 Normally Closed
input (from protective switch)
5 Optional switch input
6 Ignition Input
7 12 V Power interruptions