Denon DVD-5910 - Manual (Page 57)

57
ENGLISH
3
Turning the VIDEO MODE knob.
• The modes described below will appear on the display.
Select the item you wish to set and press the select
knob to define it.
PICTURE MODE
It is possible to select between five modes at which
picture quality settings are stored (M1 to M5) as well
as the standard settings set upon shipment from the
factory.
(See pages 52 ~ 55.)
TV SYSTEM
Select the video output connected to the TV or
monitor whose image you want to view.
On the DVD-5910, interlace output, progressive
output and HDMI/DVI output signals are each
processed on independent video circuits. The audio
output is optimized for the selected video output, so
choose the video output you wish to view.
SQUEEZE MODE
The various modes that are selected in the VIDEO
MODE are temporary. The unit will return to the
stored values when the power turus off.
AUDIO ADJUST
Depending on the connected device, the difference in
the time required to process the audio and video
signals may result for example in the lips of speaking
characters not being synchronized with the sound. If
this should happen, this delay can be adjusted by
offsetting the output of the audio signals from the
DVD-5910.
✽
For “TV SYSTEM” and “AUDIO ADJUST” selected
at “VIDEO MODE”, the change in the setting is
stored in the memory. The same setting is set when
the power is turned off then back on.
✽ “PICTURE MODE” and “SQUEEZE MODE” selected
at “VIDEO MODE” are temporary changes. The
settings return to those stored in the memory as
the default settings when the power is turned off
then back on.
Main unit
VIDEO MODE
PUSH ENTER
PICTURE MODE
TV SYSTEM
SQUEEZE MODE
ENGLISH
AUDIO ADJUST