Denon DVD-5910 - Manual (Page 38)

38
ENGLISH ENGLISH
3
Use the • and ª cursor buttons to select the desired setting, then press
the ENTER button.
q When “TV ASPECT” is selected:
4:3 PS
Select this to play wide DVDs in the pan & scan mode (with the sides
of the picture cut off). Discs for which pan & scan is not specified are
played in the letter box mode.
4:3 LB
Select this to play wide DVDs in the letter box mode (with black
strips at the top and bottom).
WIDE (16:9) (Factory default)
Select this to play wide DVDs in the full-screen mode.
w When “TV TYPE” is selected:
NTSC
Select this when your TV’s video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
PAL
Select this when your TV’s video format is PAL.
If PAL is selected, output format is fixed to PAL.
MULTI (Factory default)
Select this when your TV is compatible with both the NTSC and PAL
formats.
NTSC signals are output from the video output jacks when discs
recorded in NTSC format are played, and PAL signals are output from
the video output jacks when discs recorded in PAL format are played.
NOTE:
• If “TV TYPE” is set to a format other than a registered TV format, the
image may no longer be smooth and the top and bottom of the image
may be cut off.
e When “TV SYSTEM” is selected:
PROGRESSIVE (Factory default)
The audio signals are synchronized with the progressive output.
(For component video output signals when “COMPONENT VIDEO
OUT” at “VIDEO SETUP” is set to “PROGRESSIVE”)
INTERLACED
The audio signals are synchronized with the interlaced output.
(For video output and S-video output signals, as well as for
component video output signals when “COMPONENT VIDEO OUT”
at “VIDEO SETUP” is set to “INTERLACED”)
HDMI/DVI
The audio signals are synchronized with the video signals output via
the HDMI/DVI connectors.
OTHERS
Select this when you want to view both the interlace
output/progressive output image and the HDMI/DVI output image at
the same time.
The audio signals are set to the optimum timing for the interlace
output/progressive output image and the HDMI/DVI output image.
(Note, however, that the audio signals are not synchronized with the
interlace output/progressive output image and the HDMI/DVI output
image. To synchronize them, set to another position.)
V I DEO SE TUP
T V ASPEC T
TV TYPE
E X I T SE TUP
PROGRESSIVE MODE
SQUEE Z E MODE
TV SYSTEM
COMPONENT V I DEO OUT
4 : 3 PS
4 : 3 L B
W I DE ( 1 6 : 9 )
DE C I S I ON : ENT E R BUT TON SE L EC T :
Remote control unit Remote control unit
V I DEO SE TUP
T V ASPEC T
TV TYPE NTSC
PAL
M U LT I
SQUEE Z E MODE
TV SYSTEM
COMPONENT V I DEO OUT
PROGRESSIVE MODE
E X I T SE TUP
DE C I S I ON : ENT E R BUT TON SE L EC T :
V I DEO SE TUP
T V ASPEC T
TV TYPE
PROGRE SS I VE
I NT E RL AC ED
H D M I / D V I
O T H E R S
SQUEE Z E MODE
TV SYSTEM
COMPONENT V I DEO OUT
PROGRESSIVE MODE
E X I T SE TUP
DE C I S I ON : ENT E R BUT TON SE L EC T :