Denon DVD-5910 - Manual (Page 43)

43
ENGLISH
3
• When “DEFAULT” is selected:
When “DEFAULT” is selected and the ENTER button is
pressed, all the items are restored to their factory default
settings.
When digital connections are made with an AV amplifier, make
the speaker settings on the AV amplifier.
For DVD audio discs, the disc’s settings are given priority, so the
sound may not be produced as set with the above speaker mode
setting.
✽ Press the RETURN button to return to the “SPEAKER SETUP”
menu.
w When “DIGITAL OUTPUT” is selected:
NORMAL (Factory default)
When playing DVDs recorded in Dolby Digital or DTS, bitstream
signals are output from the digital audio output terminals. When
playing DVDs recorded in linear PCM or packed PCM, linear PCM
signals are output.
Select “NORMAL” when making digital connections to an AV
amplifier with built-in Dolby Digital and DTS decoder.
PCM
When playing Dolby Digital/DTS bitstream signals or DVDs recorded
in linear PCM or packed PCM, the signals are converted into 48
kHz/16-bit PCM (2-channel) signals and output from the digital
outputs. When playing DVDs recorded in PCM, linear PCM signals
are output.
e When “LPCM (44.1 kHz/ 48 kHz)” is selected:
OFF (Factory default)
When playing linear PCM or packed PCM DVDs that are not
copyright-protected, for 2-channel PCM audio signals up to 96 kHz,
linear PCM signals are output as such without being converted from
the digital outputs. (176.4 kHz and 192 kHz signals are converted to
88.2 kHz and 96 kHz, respectively.)
For DVDs containing multi-channel PCM signals, the digital signals
are down-mixed for output into two channels, front left and right.
(Only the front left and right channels are output for sources for
which down-mixing is prohibited.)
When playing copyright-protected linear PCM or packed PCM DVDs,
in consideration of copyrights, no digital signals are output for
sources exceeding 48 kHz/16 bits. When playing such sources,
either set to “ON” or make analog connections. (See page 15.)
ON
Linear PCM and packed PCM signals are converted to 44.1 kHz or
48 kHz and output. (The PCM digital audio output signals are
converted to 48 kHz or less in consideration of copyrights.) When
making digital connections to an AV amplifier that is not compatible
with 96 kHz/88.2 kHz signals, set to “ON”.
ENGLISH
SPE AKE R SE TUP
DELAY TIME
DE C I S I ON : ENT E R BUT TON SE L EC T :
D I STANC E
F RONT L CH
CENT ER
F RONT R CH
SURROUND R CH
SURROUND L CH
SUBWOOF ER
DE F AUL T ON
METERS
12 ft
12 ft
12 ft
12 ft
10 ft
10 ft
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUTPUT
L PCM (4 4 . 1 kH z / 4 8 kH z )
BASS ENHANCE R
SACD F I L T ER
SOURCE D I RE CT
E X I T SE TUP
COMPRESS ION
DE C I S I ON : ENT E R BUT TON SE L EC T :
ON
OF F
AUD I O SE TUP
AUD I O CHANNE L
DIGITAL OUTPUT
L PCM (4 4 . 1 kH z / 4 8 kH z )
BASS ENHANCE R
SACD F I L T ER
SOURCE D I RE CT
E X I T SE TUP
COMPRESS ION
DE C I S I ON : ENT E R BUT TON SE L EC T :
NORMAL
PCM
Remote control unit Remote control unit
Remote control unit Remote control unit