Denon DVD-5910 - Manual (Page 13)

13
ENGLISH
2 Connecting an optical fiber cable (commercially available) to the digital audio input connector (OPTICAL)
Dust cap
Remove the dust cap, line up the cable in the proper directly, then
insert it securely as far as it goes.
NOTE:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played while using
a decoder, etc., that is not DTS-compatible.
CH SEL
ENTER
(3) Connecting to a AV amplifier with a built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player’s digital
audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence
of a movie theater or concert hall.
DVD-5910
Digital audio input connector
(OPTICAL)
Digital audio input connector
(COAXIAL)
AV amplifier with a built-in decoder
(AV control center)
To power outlet
Optical fiber cable
(commercially available)
75Ω/ohms pin-plug cable
(commercially available)
(or)
Line up in proper direction
NOTE:
• Store the dust cap in a safe place, and be careful not to
lose it.
When not using the terminal, attach the cap to protect
the terminal from dust.
ENGLISH