English – Denon DVD-5910 User Manual
Page 44
44
ENGLISH
3
r When “SOURCE DIRECT” is selected:
OFF (Factory default)
Please set to OFF when performing speaker settings or setting the
delay time and playing back.
ON
Set to ON when playing back without performing the processing of
speaker settings. Performing this setting will result in the setting of
the DTS recommended all-channel, full bandwidth playback. (Note
that the volume of the sub woofer will increase by 5 dB, and there
will be an increase of 15 dB with a Super Audio CD.) This is also set
when playing back a 6-channel source of DVD audio that has been
recorded with all channels and full bandwidth. When set to “ON”,
the speaker size will be set to “Large” for all speakers and the sub
woofer will be set to “Yes”. When playing back software such as
this, perform the analog connections according to the software
instruction manual.
t When “BASS ENHANCER” is selected: (For 2channel sources)
OFF (Factory default)
No sound is produced from the subwoofer.
ON
Sound is produced from the subwoofer.
In the case, set the subwoofer to “YES” at the speaker settings.
This works only with analog audio output.
This does not work, at “SOURCE DIRECT” is on.
y When “COMPRESSION” is selected:
OFF (Factory default)
Select this for the standard range.
ON
Select this to achieve powerful sound even when the volume is low.
This setting is suited for watching DVDs late at night with the volume
low. (This setting is only valid for DVDs recorded in Dolby Digital.)
u When “SACD (Super Audio CD) FILTER” is selected:
50kHz (Factory default)
When playing Super Audio CDs, high frequencies of 50kHz and
higher are cut.
100kHz
When playing Super Audio CDs, high frequencies of 100kHz and
higher are cut.
Set to 100kHz when a high frequency compatible AV amplifier is
connected.
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUTPUT
L PCM (4 4 . 1 kH z / 4 8 kH z )
BASS ENHANCE R
SACD F I L T ER
SOURCE D I RE CT
E X I T SE TUP
COMPRESS ION
DE C I S I ON : ENT E R BUT TON
SE L EC T :
ON
OF F
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUTPUT
L PCM (4 4 . 1 kH z / 4 8 kH z )
BASS ENHANCE R
SACD F I L T ER
SOURCE D I RE CT
E X I T SE TUP
COMPRESS ION
DE C I S I ON : ENT E R BUT TON
SE L EC T :
OF F
ON
ENGLISH
Remote control unit
Remote control unit
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUTPUT
L PCM (4 4 . 1 kH z / 4 8 kH z )
BASS ENHANCE R
SACD F I L T ER
SOURCE D I RE CT
E X I T SE TUP
COMPRESS ION
DE C I S I ON : ENT E R BUT TON
SE L EC T :
ON
OF F
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUTPUT
L PCM (4 4 . 1 kH z / 4 8 kH z )
BASS ENHANCE R
SACD F I L T ER
SOURCE D I RE CT
E X I T SE TUP
COMPRESS ION
DE C I S I ON : ENT E R BUT TON
SE L EC T :
100kHz
50kHz
✽ To exit the setup mode
Use the ª cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.