Denon DVD-5910 - Manual (Page 39)

39
ENGLISH ENGLISH
3
r When “COMPONENT VIDEO OUT” is selected: (NOTE)
PROGRESSIVE (Factory default)
The signals output from the DVD-5910’s “COMPONENT VIDEO
OUT” connector are formatted in the progressive format.
Select this when using the DVD-5910 connected to a progressive
type TV.
INTERLACED
The signals output from the DVD-5910’s “COMPONENT VIDEO
OUT” connector are formatted in the interlaced format.
Select this when using the DVD-5910 connected to an interlace type
TV.
NOTE:
• For the component output only, it is possible to switch between
interlace image output and progressive image output. It is not
possible to specify progressive image output for the Video output
connector or S-Video output connector.
t When “SQUEEZE MODE” is selected:
OFF (Factory default)
Select this to display as full size of a 16:9 TV ,regardless
of the image’s size.
ON
Select this to display the image with a ratio of 4:3 at
the center of a 16:9 TV, regardless of the image’s size.
AUTO
Select this when playing back a 4:3 image that you
wish to display at 4:3 aspect ratio at the center of
a 16:9 TV.
Only effective for set to “WIDE (16:9)” at “TV ASPECT”.
(See page 38.)
No effective for interlaced image.
y When “PROGRESSIVE MODE” is selected:
AUTO (Factory default)
The set identifies the type of material on the disc being played (film
or video) and selects the mode automatically.
VIDEO1
This mode is best suited for playing discs containing video material.
VIDEO2
This mode is best suited for playing discs containing video material
or 30-frame film material.
Remote control unit Remote control unit
V I DEO SE TUP
T V ASPEC T
TV TYPE
SQUEE Z E MODE
TV SYSTEM
COMPONENT V I DEO OUT
PROGRESSIVE MODE
E X I T SE TUP
DE C I S I ON : ENT E R BUT TON SE L EC T :
PROGRE SS I VE
I NT E RL AC ED
V I DEO SE TUP
T V ASPEC T
TV TYPE
SQUEE Z E MODE
TV SYSTEM
COMPONENT V I DEO OUT
PROGRESSIVE MODE
E X I T SE TUP
DE C I S I ON : ENT E R BUT TON SE L EC T :
OF F
ON
A U T O
TV
TV
V I DEO SE TUP
T V ASPEC T
TV TYPE
SQUEE Z E MODE
TV SYSTEM
COMPONENT V I DEO OUT
AUTO
VIDEO1
VIDEO2
PROGRESSIVE MODE
E X I T SE TUP
DE C I S I ON : ENT E R BUT TON SE L EC T :
✽ To exit the setup mode
Use the ª cursor button to select “EXIT SETUP”, then press the
ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.