Denso BHT-7000 - Manual (Page 58)

42
DOWNLOAD FILE
XXXXXXXX.XXX
Out of memory!!
Retry?
1:Yes 2:No
DOWNLOAD FILE
XXXXXXXX.XXX
Too many files!!
Retry?
1:Yes 2:No
DOWNLOAD FILE
XXXXXXXX.XXX
Communication error!!
Retry?
1:Yes 2:No
If an error occurs during downloading
If some error occurs during downloading, the BHT-7000 beeps three times and shows
one of the following screens with the prompt "Retry?":
To retry the download, press the 1 and ENT keys; to abort it, press the 2 and
ENT keys.
■ Problem
The memory is insufficient for storing files to be
downloaded.
■ Solution
Press the 2 key to return to the SYSTEM MENU,
then delete unnecessary files in the memory or
decrease the size of the file to be downloaded.
(Refer to Subsection 2.6.3, [ 7 ] and [ 2 ].)
■ Problem
The current download will exceed the maximum
of 80 files in the memory.
■ Solution
Press the 2 key to return to the SYSTEM MENU.
Delete unnecessary files in memory or decrease
the number of files to be downloaded if you at-
tempted to download more than one file (Refer to
Subsection 2.6.3, [ 7 ] and [ 2 ].)
■ Problem
Downloading has failed.
■ Solution
To retry downloading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port and communications pa-
rameters in the SET SYSTEM menu or perform the
communications test in the TEST menu. (Refer to
Subsection 2.6.3, [4.5] and [5.7].)
It is also necessary to check the communications
parameters setup of the host computer.