Denso BHT-7000 - Manual (Page 54)

38
Press 2 or use * and * to select
the desired set item.
[ 2 ] Selecting a desired setting
First, select a desired item on the current screen by using the numerical key or the
cursor keys (
* and * ) so as to highlight the desired item.
Use the * and * keys to select a desired setting and then press the ENT key. The
screen returns to the previous selection screen.
Use * and * to select the desired
setting.
ENT
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of , ,
, and keys, respectively
SET COMMUNICATION
1:OPTICAL
2:CONNECTOR
3:COM PORT
4:PROTOCOL TYPE
SET COM DEFAULT PORT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector
SET COM DEFAULT PORT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector
SET COM DEFAULT PORT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector