Denso BHT-7000 - Manual (Page 39)

23
Chapter 2. Getting Started the BHT-7000 and System Mode
(3) Press the 3 key on the SET SYSTEM screen
to select the "DATE/TIME" and then press the
ENT key, and the screen shown at left will
appear.
(4) Use the numerical keys to enter the year (only
the last two digits), month, day, hour, and
minute in this order. If the data is in one
digit, add a 0 (zero) preceding the data.
For the year, be sure to enter the last two
digits of the year. For the hour, enter it
in the 24-hour format.
If any of the year, month, day, hour, and
minute is not entered, the ENT key
will be deactivated.
If you make a wrong entry, press the
backspace key to delete it and then enter the
correct data.
NOTE
SET DATE/TIME
00/01/01 00:00
_ / / :
[Example] To set 1999, August 19, at 4:00
p.m.
Press 9 , 9 , 0 , 8 , 1 , 9 , 1 , 6 , 0 , and
0 .
(5) Press the ENT key to register the above
setting.
(6) Press the C key to return to the SET SYSTEM
screen.
SET DATE/TIME
00/01/01 00:00
99/08/19 16:00_
SET DATE/TIME
99/08/19 16:00
_ / / :