Denso BHT-7000 - Manual (Page 26)

10
■ Ir-Transfer Utility E (option)
Running on the host computer, this utility transfers files between the BHT-7000 and the
host computer. For its file transfer control procedure, the utility uses the BHT-Ir
protocol. (For the details about the BHT-Ir protocol, refer to Chapter 3, Subsection
3.3.2.)
To transfer files under any of the following conditions, use Ir-Transfer Utility E:
- Via an external IR transceiver
- Via an IR port integrated in a computer
■ Transfer Utility (option)
Running on the host computer, this utility transfers files between the BHT-7000 and the
host computer. It uses the BHT-protocol as a file transfer control procedure. (For the
details about the BHT-protocol, refer to Chapter 3, Subsection 3.3.1.)
To transfer files under any of the following conditions, use Transfer Utility:
- When the BHT-7000 is placed on the CU-7000
- Via the direct-connect interface of the BHT-7000