Kanguru 5HD-SATA - Manual (Page 21)

21
6. OTHER OPERATIONS
Besides the Copy and Compare modes, the KanguruClone Hard Drive Duplicator has several
additional operations that are incredibly useful, including: VERIFY, ERASE and LOAD.
6.1 Verify
VERIFY will check all connected hard drives and determine if they are readable. The verification
operation will check any hard drive connected to a Target port and verifies that all sectors on the hard
drive are readable.
To verify your hard drives for duplication:
1. From the Main menu, tap the ‘SET’ button to navigate to VERIFY.
2. Connect your hard drives to any available Target ports. Tap the ‘RUN’ button to begin the verify
process. The following screen will be displayed during verification:
Percentage completed
Capacity verified Data verification rate
Number of Target drives
3. Once the verification process has completed, the following screen will be displayed:
A green LED indicator light will appear by the drives that have been verified as readable. A red LED
indicator light will appear by drives that are unreadable.
4. Tap the ‘SET’ button to return to the Main menu.
Other Operations / Verify