Kanguru 5HD-SATA - Manual (Page 11)

11
The User Interface
2. THE USER INTERFACE
Kanguru Solutions designed the KanguruClone’s menu system with the professional in mind. The
menu system is fast, responsive, and easy to navigate. This means fewer key presses are needed to
achieve a desired action.
Important! The menu system is controlled by 2 push buttons located to the right of the LCD screen.
The ‘SET’ and ‘RUN’ buttons can be pressed in two ways:
• Tap – the button is pressed and released immediately. If the BTN. SOUND option is enabled
(see section 7.4 Button Sound on page 27), a Tap will be accompanied by a short audible tone.
• Hold – the button is pressed and held for 2 seconds. If BTN. SOUND option is enabled (see
section 7.4 Button Sound on page 27), a Hold will be accompanied by a short audible tone,
followed by a higher pitched tone.
Note: When following the instructions listed in this manual, please pay close attention to whether you
should tap a button or hold a button. The same button may function one way if tapped and another
way if held.