Kanguru Mobile Clone 1HD Duplicator - Manual (Page 28)

28
8.7 Skip Read Error
The SKIP READ ERROR option allows you to enable or disable error skipping during FULL, BRIEF
and RESIZE modes. Tap the ‘RUN’ button to change this option.
• [ ] – Disabled (default). When an error is detected while reading from the Source, the duplicator
will cancel the current process.
• [ ٭ ] – Enabled. When an error is detected while reading from the Source, the duplicator will
skip the bad sector on the Source and fill it with a zero on the Target.
8.8 Load Full Image
The LOAD FULL IMAGE option allows you to control how image files are saved to a Storage Center
during a Load operation (see section 6.4 Load on page 21). Tap the ‘RUN’ button to change this
option.
• [ ] – Disabled (default). The system will analyze the Source’s file system before building the
image. If the Source’s file system is recognized as FAT/ NTFS/ EXT1/ 2/ 3/ 4, the image will be
a Brief image based on the file system and data area. If the Source’s file system is unrecognized
the image will be a Full sector by sector image.
• [ ٭ ] – Enabled. When executing a Load process, the system will not analyze the Source’s file
system and will automatically build a Full sector by sector image.
8.9 Total Copy Count
TOTAL COPY COUNT keeps track of the total number of successful and unsuccessful duplications
produced by the system. This is a running count that includes all copy modes. Tap the ‘RUN’ button
to view the total copy count.
Skip Read Error / Load Full Image / Total Copy Count