Kanguru Mobile Clone 1HD Duplicator - Manual (Page 20)

20
6.3 Verify
VERIFY will check that all sectors are readable on the drive connected to the side of the duplicator
labaled “TARGET”. If a hard drive fails duplication, you should run the Verify feature to ensure that
the drive is healthy.
To verify your hard drives for duplication:
1. From the Main menu, tap the ‘SET’ button to navigate to VERIFY.
[VERIFY ]
2. Connect your hard drive to the side labled “TARGET”. Tap the ‘RUN’ button to begin the
Verify process. The following screen will be displayed during verification:
[VERIFY ]
1.08%
Percentage Completed
3. Once the verification process has completed, the following screen will be displayed:
[VERIFY ]
100.00% SUCCESS
Tap the ‘SET’ button to view the total Verify time.
Verify