Kanguru Mobile Clone 1HD Duplicator - Manual (Page 26)

26
8.2 System Info
SYSTEM INFO allows you to view information regarding your duplicator’s firmware version and
build.
To view the system information:
1. From the ADVANCED SETUP menu, tap the ‘SET’ button to navigate to the SYSTEM INFO
function.
2. Tap the ‘RUN’ button to begin viewing the system’s information:
KANGURU HDD COPIER
VER: 2.26 BLD:1011
3. Tap the ‘SET’ button to exit back to the ADVANCED SETUP menu.
8.3 Set to Default
SET TO DEFAULT allows you to restore all settings back to their factory default values.
To reset your duplicator to its original default configuration:
1. From the ADVANCED SETUP menu, tap the ‘SET’ button to navigate to the SET TO DEFAULT
function.
2. Tap the ‘RUN’ button. The screen will display a message asking you to confirm the reset. Tap
the ‘RUN’ button to confirm, or tap the ‘SET’ button to cancel.
ARE YOU SURE?
SET->NO RUN->YES
3. Once the reset has been completed, you will be displayed a confirmation message on the screen.
Press any button to return to the ADVANCED SETUP menu.
System Info / Set to Default