Load – Kanguru Mobile Clone 1HD Duplicator User Manual

Page 21

6.4 Load

LOAD allows you to store an image of a hard drive to a Storage Center.

A Storage Center is a hard drive that has been formatted to store hard drive images. The Storage

Center allows you to quickly and conveniently access common duplication projects. For information

To load an image of a hard drive to a Storage Center:

1. From the Main menu tap the ‘SET’ button to navigate to LOAD.

[LOAD ] 000

2. Connect your Storage Center hard drive to the side of duplicator labeled “SOURCE”.

3. Connect the Master hard drive to the side of duplicator labeled “TARGET”.

4. Tap the ‘RUN’ button to begin the load process.

Note: If the screen displays the message “SOURCE NOT FORMATTED” it means that the

hard drive connected to the Source side has not been formatted as a Storage Center. Tap the

‘RUN’ button to format the hard drive connected to the Source side as a Storage Center or tap

the ‘SET’ button to cancel.

5. The duplicator will ask you to input a file name for the image. Enter a file name:

Please Input

>[000] SEL IMG FILE

a) The file name consists of three digits. The digit furthest to the right will be blinking, indicating

that it is currently selected. Tap the ‘RUN’ button to increase the value by one.

b) Tap the ‘SET’ button to select the next digit to the left. Tap the ‘RUN’ button to increase the

digit by one. Repeat this step as necessary.

6. When you have completed naming the image file, hold the ‘RUN’ button and the load process

will begin.

Note: If the image file name you entered is already being used by another image file, the system

will ask you to confirm overwriting the previously saved file. Tap the ‘RUN’ button to confirm

or tap the ‘SET’ button to cancel.

[LOAD ]001

15.94G

33.44%

Total data to be loaded

IMG file number

Percentage completed

Load