Infloor Infloorboard User Manual

Page 25

Infloorboard™ Application & Installation Manual

FLOORING COVERING INST

ALLA
TION

LAMINATE OVER INFLOORBOARD™

Infloorboard™ shall be installed over a
wooden subfloor, complying with
“General Infloorboard™ Installation
Requirements For All Flooring Over
Wood Subfloor”. In addition, the fol-
lowing specific cautions and instructions
shall be followed:
When installing laminate flooring, it is
advised that a thin layer of underlay-
ment plywood shall be applied over
Infloorboard™. In wet locations a
sealant layer should be added over the
underlayment layer of plywood. Many,
but not all, laminate flooring products

are suitable and recommended by the manufacturer for use with radiant floor
heat. Check before installing. Many laminate flooring products have floor tem-
perature limits that need to be observed as well. Install laminate flooring cross-
wise to Infloorboard™ whenever possible. It is recommended that laminate
flooring installed over Infloorboard™ shall employ controls that gradually adjust
water temperature going to the Infloorboard™ with a reset curve. A floor tem-
perature limiting sensor can be used to comply with flooring manufacturer’s
flooring temperature specifications.

ENGINEERED WOOD OVER
INFLOORBOARD™

Infloorboard™ shall be installed over a
wooden subfloor, complying with
“General Infloorboard™ Installation
Requirements For All Flooring Over
Wood Subfloor”. In addition, the fol-
lowing specific cautions and instruc-
tions shall be followed:
Many, but not all, engineered wood
flooring products are suitable and rec-
ommended by the manufacturer for
use with radiant floor heat. Check
before installing. Many engineered
wood flooring products have floor tem-

perature limits that need to be observed as well. Install engineered wood flooring
crosswise to Infloorboard™ whenever possible. It is recommended that engi-
neered wood flooring installed over Infloorboard™ shall employ controls that
gradually adjust water temperature going to the Infloorboard™ with a reset
curve. A floor temperature limiting sensor can be used to comply with flooring
manufacturer’s flooring temperature specifications.

Infloorboard™