Infloor Infloorboard User Manual

Page 14

www.Infloor.com

INST
ALLA
TION

AFTER GLUING, SCREW OR CROSS STAPLE BOARDS TO SUBFLOOR:

After you have glued the Infloorboards, the boards should be screwed to the subfloor. On

full size pieces (16”x48”), ten screws should be used, 8 on the perimeter and 2 in the mid-

dle, or as a general rule, 16” O.C. for the perimeter and 24” O.C. for the interior. This pat-

tern is shown below. As an alternative to gluing and screwing, Infloorboard™ may be

installed by gluing and stapling, as shown below. When installed with this method, it is

very important that the board is glued and stapled with the same quantity of glue and sta-

ple points as shown in the screwing pattern. The boards should also be cross stapled as

shown for extra strength. Cross stapling means 2 staples are put closely together at opposing

45° angles, as shown below.

CROSS STAPLING INFLOORBOARD™ BOARDS

SCREWING
INFLOORBOARD™ BOARDS

I N F L O O R B O A R D “

NAILING OR CROSS STAPLING
PATTERN FOR INFLOORBOARD™
BOARDS