Dhcp server setup, Setting up your dhcp server, Appendix b – Datalogic Scanning PDA User Manual
Page 73: Appendix b dhcp server setup
User’s Manual
61
Appendix B
DHCP Server Setup
Setting up your DHCP Server
In order for FMU to be able to use DHCP Discovery, the network DHCP
Server must be configured to provide an FMU server address. To set up your
DHCP Server to supply the FMU Server information to each terminal, you
will need to add a new DHCP option.
Option “233” is the default option used by the terminal if FMU DHCP Dis-
covery is enabled. This option should contain the string “FMUserver”, where
server is either the IP address or hostname of the FMU Server where auto-dis-
covering terminals will associate (for example, FMU127.0.0.1). See
Terminals for RF Connectivity” on page 52
for details on setting up a terminal
for DHCP.