Network settings – Datalogic Scanning PDA User Manual
Page 57

Configuration Settings
User’s Manual
45
Network Settings
Click the
Network Settings
tab to view and select available options.
Figure 21. Network Configuration Settings
Table 2. Network Configuration Settings
Network Settings
Description
Action
Enable DHCP
Automates configuring of computers using TCP/IP.
Check to
enable.
IP Address
Network address of a computer on a network.
Enter value.
Subnet Mask
Number used to identify a subnetwork so an IP address can be
shared on a Local Area Network (LAN).
Enter value.
Gateway
System (bridge) for exchanging information across networks.
Enter value.
DNS Server
Domain Name Server aka Domain Name Service, server that
resolves IP addresses from host names.
Enter value.
Network configuration settings only apply during Direct Connect Dynamic Terminal
configuration, they do not apply to RF connections.