Datalogic Scanning PDA - Manual (Page 65)

RF Connection
User’s Manual 53
Figure 24. FMU Client Settings - RF
A B
Enable FMU
Client Check to enable the terminal to work with FMU.
Connection Select Network.
Discovery Select Manual or DHCP.
IP Address Enter the server name or IP address.
Group Name Enter a group name, or leave blank for the Default group.
Update Time Select a time from the 24-hour clock to indicate when the terminal will
attempt to contact the FMU Server. The terminal must be ON in order
for the update to run.
An alarm can be set to wake the terminal at the scheduled update time.