Datalogic Scanning PDA - Manual (Page 54)

Configuration Settings
42 Falcon ® Management Utility (FMU)
Reset Values
Globally resets all values in the selected Configuration dialog.
Figure 18. Reset Values
Factory Default Returns all Configuration items to their factory default settings.
All Off Turns every on/off parameter off and sets all min/max lengths to their
lowest values
*All On Turns every On/Off parameter on and sets all min/max lengths to their
highest values.
*This default set is normally used only for troubleshooting. It gives the best chance
of reading an unknown bar code symbology and also identifies the symbology
of each bar code scanned.