Datalogic Scanning PDA - Manual (Page 31)

Menu
User’s Manual 19
Assign Packages
Adds or removes packages assigned to the selected group.
See “Assigning a Package” on page 36
Update Terminal(s) Now
Figure 7. Update Terminal(s) Now Menu
When Update Terminal Now is selected, the server will send a message to each
terminal indicating that the terminal needs to be updated. The terminal oper-
ator will be instructed on how to proceed. The selected terminal or group is
then updated immediately. See
“Updating Terminals” on page 51 and “Updat-
ing RF Terminals” on page 55 .
You can specify either an individual terminal or an entire group.
Exit
Quits the FMU application.
Add Package Ctrl+Shift+P Adds a new package to the selected server.
See “Adding a Package” on page 32
Add File(s) Ctrl+Shift+F Adds new files to the selected package.
See “Adding Files to a Package” on page 32
Add Firmware
Image File Ctrl+Shift+I Adds a firmware image file to the selected package.
See “Adding a Firmware Image File” on page 34
All terminals are updated automatically after a reset or reboot.