Datalogic Scanning PDA - Manual (Page 66)

Terminal to FMU Server Communications
54 Falcon ® Management Utility (FMU)
.
6. On the terminal, enter the group to which you want to add the termi-
nal. If you leave the field blank the terminal will automatically be
assigned to the Default Group.
7. If you want to set a specific update time, select a time in the drop-
down box for Update Time . The terminal will attempt to contact the
FMU Server at the selected time.
8. Click OK to complete the setup.
See Also
• “Managing Servers” on page 25
• “Working with Groups” on page 29
• “Adding and Assigning Packages” on page 31
• “Terminals” on page 36
• “Working with Files” on page 39
• “Network Settings” on page 45
IP Address
You can easily change the group assignment for a terminal after it has been added to
FMU. See
"Terminal Group Assignments" on page 36 .
The terminal must have a valid RF connection and be ON in order for a scheduled
update to occur. See
"Updating Terminals" on page 51 and "Updating RF Terminals"
on page 55 .