Harken HCI025110345BCC Integral Backstay Adjuster - Manual (Page 7)

7
Inspection
Perform a visual inspection of the Integral Hydraulic Cylinder prior to each use to ensure clean, unobstructed
working conditions.
Care and Maintenance
Harken cylinders should give years of reliable service. If cylinder is properly bled, and clean environment is
maintained, no regular maintenance is required. Seals should be changed every ten years (dependent on use)
unless cylinder eases without pressure relief valve releasing the pressure first. If you experience any problems
with your Harken Integral Hydraulic Cylinder, contact your Harken Service Representative.
Warranty
Harken warrants that each Harken product, when properly used and maintained, will be free from defects in
material and workmanship from the date of receipt of the product by the final customer. Harken products are
covered by two different kinds of warranties, on the basis of the purchaser and use made of them.
For complete warranty or for information relating to a specific warranty concern, please refer to the following:
Harken Catalog, Website: www.harken.com/manuals
Call or Email the Nearest Harken Distributor or
Harken Corporate Headquarters
Loctite ® is a registered trademark of Henkel AG & Company KGaA