Harken HCI025110345BCC Integral Backstay Adjuster - Manual (Page 2)

2
CAUTION! Strictly follow all instructions to
avoid an accident, damage to your vessel,
personal injury or death. See harken.com/
manuals for additional safety information.
Description
The Harken Integral Hydraulic Cylinder is designed for use
on sailboats and is sized according to boat and rigging.
When ordering, always have your choice confirmed by
a Harken representative or other sailing professional. The
limited warranty does not cover use of product outside
of normal sailboat applications.
This user manual contains important information for the
correct use of the Integral Hydraulic Cylinder. Read all
instructions carefully before use. If you do not understand
these instructions, contact Harken. Do not use the Integral
Hydraulic Cylinder unless you have a sufficient level of
sailing training and experience.
Parts ordered separately
Standard eye/jaw toggle
Tools Required
Hex driver, 3 mm
Loctite
®
, Blue 242
WARNING! Cylinders are capable of exerting
very high loads and can break associated
components. Inspect all standing backstay
and forestay rigging components to ensure
they are in good condition. Failure to inspect
components may result in sudden breakage
at high loads.
Introduction