Harken 2698 T2 Soft-Attach 18 mm Block User Manual
Page 2
Tying Knots
Lashing at 90° – Block 90° to Bail
Run line through mouth, head, around bail, and back on the same side.
Run line from mouth through head, around bail, and back on the other side for a second lap.
Secure with Carrick knot or other secure knot. Consult knot tying book or see www.harken.com/knots.
See www.harken.com/knots. Alternatively, consult a good knot tying book or consult a rigger.
Lashing at 0° – Block and Bail In-line
Run line through mouth, through head, around bail, and down on other side. Repeat so there are two laps.
Tie ends using a Carrick knot or other secure knot. Photo is not
intended to teach this knot. Consult knot tying book or see
www.harken.com/knots.
Do not tie square knot or
“granny knot”. These can
loosen.
Lap on same side.
Block 2161: Use small zip tie or needle and
sailmaker’s twine to secure lashing strands to head.
Block 2161: Use sail-
maker’s twine or small
zip tie to secure lash-
ing strands to head.