Guralp Systems CMG-5TD User Manual

Page 8

Quick start

6. In the Available Streams window, the identifier of the instrument will

appear in the left hand frame (which appears similar to the tree type

format of Windows Explorer) under Network Local Com1’ (if

→

Com1 is used)

7. The data streams will appear in the right-hand frame.

8. The Stream IDs are six-character strings which uniquely identify each

instrument, component and sample rate. (There may be up-to four
different sample rates per channel) The stream ending in ‘00’ contains

status information from the digitiser. Streams with higher sample rates
will appear in the display sooner than the slower sample rates and it

might take several minutes for the status stream to appear.

9. Select the data streams in the right side of the window by clicking on

the first and then control-clicking on the last. Press the “ENTER” key
to open these streams in a new ‘Waveview’ window.