3 analogue connector – Guralp Systems CMG-5TD User Manual
Page 39
Connector pin-outs
7.3
Analogue connector
This is a standard 19-pin “mil-spec” socket,
conforming to MIL-DTL-26482 (formerly
MIL-C-26482). A typical part-number is
02E-14-19S although the initial “02E” varies with
manufacturer.
Suitable mating connectors have part-numbers
like ***-14-19P and are available from Amphenol,
ITT Cannon and other manufacturers.
Pin Function
Pin Function
A High-gain N/S acc non-inverting
L
Unity-gain Z acc inverting
B High-gain N/S acc inverting
M Unity-gain Z acc non-inverting
C Unity-gain N/S acc non-inverting
N High-gain Z acc inverting
D Unity-gain N/S acc inverting
P
High-gain Z acc non-inverting
E
Calibration signal
R High-gain E/W acc non-inverting
F
Power +12 V
S Calibration enable
G Power 0 V
T Signal ground
H
not connected
U Unity-gain E/W acc non-inverting
J
Open/Closed loop mode
V High-gain E/W acc inverting
K Unity-gain E/W acc inverting
Wiring details for the compatible plug,
***-14-19P, as seen from the cable end (i.e.
when assembling).
39
Issue D - April 2013