Denon AVR-4800 - Manual (Page 54)

54
DSP surround simulation
1 Select the surround mode for the input channel.
DSP
SIMULATION DIRECT STEREO
DOLBY / DTS
SURROUND
5CH / 7CH
STEREO
SURROUND MODE
(Main unit)
(Remote control unit)
DOLBY / DTS
SURROUND DIRECT
DSP SIMULATION 5CH / 7CH STEREO STEREO
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
3 1
HOME THX CINEMA
TUNING
BAND TITLE MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI SPEAKER DVD
SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
DOLBY / DTS
SURROUND DIRECT
DSP SIMULATION 5CH / 7CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD MD MULTI DECK
SYSTEM SETUP SURROUND PARAMETER
CH SELECT
SELECT
ENTER
1
3
2,4
2 Display the surround parameter screen on the monitor.
The screen for the selected surround mode appears.
MENU/GUIDE
SURROUND
PARAMETER
3 Set the parameters.
The 6.1 and 7.1 Surround parameter can be operated directly using the buttons on the main
unit’s panel.
4 To end the setting mode, press the surround parameter button again.
MENU/GUIDE
SURROUND
PARAMETER
NOTES:
• When “Default” is selected and the
cursor button is pressed, “CINEMA EQ.” and “D.COMP.” are automatically turned off, “ROOM
SIZE” is set to “medium”, “EFFECT LEVEL” to “10” and “DELAY TIME” to “30ms”.
• The “ROOM SIZE” expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
WIDE SCREEN SUPER STADIUM ROCK ARENA
JAZZ CLUB CLASSIC CONCERT
MONO MOVIE MATRIX
6.1 / 7.1
SURROUND
(Main unit)
(Remote control unit)