Denon AVR-4800 - Manual (Page 47)

47
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together.
Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources.
1 Select “FADER”.
CH SELECT
ENTER
The channel switches in the order shown below each time
this button is pressed.
2
Press the button to reduce the volume of the surround
channels, the button to reduce the volume of the front
channels.
The fader function does not affect the
SW, EL and ER channels.
The channel whose channel level is adjusted lowest can be faded
to –12 dB using the fader function.
If the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared, so adjust the fader
again.
2
1
HOME THX CINEMA
TUNING
BAND TITLE MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI SPEAKER DVD
SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
DOLBY / DTS
SURROUND DIRECT
DSP SIMULATION 5CH / 7CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
MUTING
MASTER VOL.
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD MD MULTI DECK
SYSTEM SETUP SURROUND PARAMETER
CH SELECT
SELECT
ENTER
This is only displayed when setting the fader control.
FL C FR SR SBR SBL
SL SW FADER