Gullco GK-200-RL - Manual (Page 42)

T-12
Accurate calculations are preferred, however, a practical test whereby the distance of travel may be
timed at full speed and then the distance divided by the time to give a value of full speed. Any
inaccuracies in the calibration, all be it small, will magnify through accumulation over distance. For
example, if the true full speed of a unit is 18.3125” per minute, and is calibrated to 18.0000” per
minute, every time the control thinks that it has travelled 18”, it would have, in fact travelled an extra
0.3125”. Therefore, there would be a 3.125” [7.94mm] error on 180” [457.2mm] of theoretical travel.
STANDARD GULLCO PRODUCT SPEED CALIBRATION TABLE
PRODUCT MAXIMUM SPEED
KAT
®
CARRIAGES IMPERIAL METRIC
GK-200-RL 16.3625 ”/MIN 41.5607 CM/MIN
GK-200-RM 32.7249 ”/MIN 83.1213 CM/MIN
GK-200-RH 88.3573 “/MIN 224.428 CM/MIN
GK-200-RL C/W HI-SPEED GEAR TRAIN 43.6332 “/MIN 110.828 CM/MIN
GK-200-RM C/W HI-SPEED GEAR TRAIN 87.2665 “/MIN 221.657 CM/MIN
GK-200-RH C/W HI-SPEED GEAR TRAIN 235.619 “/MIN 598.473 CM/MIN
GK-200-RL C/W LOW-SPEED GEAR TRAIN 6.98132 “/MIN 17.7325 CM/MIN
GK-200-RM C/W LOW-SPEED GEAR TRAIN 13.9626 “/MIN 35.4654 CM/MIN
GK-200-RH C/W LOW-SPEED GEAR TRAIN 37.6991 “/MIN 95.7557 CM/MIN
GK-200-FL 25.7652 ”/MIN 65.4436 CM/MIN
GK-200-FM 51.5304 ”/MIN 130.887 CM/MIN
GK-200-FH 139.132 “/MIN 353.395 CM/MIN
MOGGY’S IMPERIAL METRIC
GM-03 115.178 ”/MIN 292.552 CM/MIN
SAM’S IMPERIAL METRIC
GM-02 66.1000 ”/MIN 168.000 CM/MIN
KAMEL ROLLS IMPERIAL METRIC
KR-1500-035
35.4302 “/MIN 89.9927 CM/MIN
KR-1500-070 70.8604 “/MIN 179.985 CM/MIN
POSITIONERS REVOLUTIONS PER MINUTE
GP-250-M & GPP-250-M 4.62962 REV/MIN
GP-250-H & GPP-250-H 12.5000 REV/MIN