GAMMA 5800 Els STRINGING MACHINE 2 POINT SC MOUNTING (Issue 6 - July 2014) - Manual (Page 8)

8
String Clamp Installation
The post of the String Clamp and tube of the
String Clamp base are treated with grease to
provide protection against corrosion during
shipping and while in storage. Remove any
excessive grease with a clean cloth prior to
use. The post and tube may also be cleaned
with isopropyl alcohol. After this type of thor-
ough cleaning, the post and tube should be
treated with a light coating of machine oil to
protect the surfaces against corrosion and
to ensure smooth operation.
ASSEMBLY INSTRUCTIONS
Turntable and Mounting System
Installation
To install the Turntable position the Turntable
over the turntable pin and align the bolts,
located in the poly bag, with the holes in
the f ange. Secure them with the included
hex wrench.