GAMMA 5800 Els STRINGING MACHINE 2 POINT SC MOUNTING (Issue 6 - July 2014) - Manual (Page 12)

12
Setting Tension
To change the Tension Setting press F2
to increase the Tension Setting in the tens
place, F3 to increase the Tension Setting
in the units place and F4 to increase the
Tension Setting in the tenths place. To
decrease the Tension Setting press F6 to
decrease the Tension Setting in the tens
place, F7 to decrease the Tension Setting
in the units place and F8 to decrease the
Tension Setting in the tenths place.
NOTE: Continuing to press the buttons for the lower place values will increase or
decrease the higher place values.
Setting LBS-KGS
To select LBS (pounds) or KG (kilograms),
pressing the LBS-KG Button will toggle
back and forth between LBS and KG. The
tension setting can be switched between
LBS and KG at any time and the tension
setting will be displayed accordingly.
Setting Different Tensions for Main
Strings and Cross Strings
To preset Tension Settings for the Main
Strings and Cross Strings, press the MAIN/
CROSS String Button to toggle between
the Main String and Cross String tension
settings.
To set the tension value for the Main Strings,
press the MAIN/CROSS String Button and
when the Main String Icon on the display is highlighted, set the Main String tension value. To
set the tension value for the Cross Strings, press the MAIN/CROSS String Button and when
the Cross String Icon on the display is highlighted and set the Cross String tension value.
Once the desired Main String and Cross String tension values are entered, to save the set-
tings in the active Memory Setting press the ENTER button.
NOTE: The active tension setting is displayed by the large numbers on the screen for
whichever string icon is highlighted on the screen.
MACHINE FUNCTIONS