Installation, Operation – GAI-Tronics 723-901 SmartSeries Remote Subset Amplifier User Manual
Page 6
Pub. 42004-326C
Model 723-901 SmartSeries
®
Remote Subset Amplifier
Page 6 of 13
f:\standard ioms - current release\42004 instr. manuals\42004-326c.doc
03/12
Installation
WARNING
Explosion Hazard - Substitution of components may impair suitability for
Class 1, Div. 2 usage.
Do not remove equipment while circuit is energized.
CAUTION
Do not install this equipment in hazardous areas other than those indicated on the equipment
approval list in the “Specifications” section of this manual. Such installations may cause a safety
hazard and consequent injury or property damage.
The installation procedure for the Model 723-901 SmartSeries
®
Remote Subset Amplifier is as follows:
1. Plug the amplifier connector P1 (located on the rear of the amplifier) into the J1 connector of the
Model 7245-004 Enclosure.
2. Tighten the four screws in the corners of the amplifier.
Operation
The Model 723-901 SmartSeries
®
Remote Subset Amplifier supports page, party, and auxiliary input
(optional) operations of the remote subset. Refer to the appropriate remote subset manual for all
operating details.