beautypg.com

Foxconn Z75M-S User Manual

Page 94

background image

RAID CONFIGURATION

87

6. Use Up or Down arrow key to select the desired strip size when entering “

Strip Size” menu.

The default value is 64K. Press .

Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5

Copyright(C) 2003-04 Intel Corporation All Rights Reserved.

The following are typical values:

RAID0 - 128KB

RAID10 - 64KB

RAID5 - 64KB

Intel(R) Rapid Storage Technology - Uption ROM - 11.0.8.1204

Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.

Name:

RAID Level:

Disks:

Strip Size:

Capacity:

Sync:

TryRAID5

RAID5(Parity)

Select Disks

128K

149.1 GB

N/A

Create Volume

[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

[

HELP

]

64KB

[

CREATE VOLUME MENU

]

7. In “

Capacity” item, use the default value, and press . The default value is twice that

of the smallest hard disk size, that is, 74.5GB * 2 = 149GB.
8. Select “

Create Volume” and press . A warning message will appear:

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume ? (Y/N) :

Press to create the volume and return to the main menu.

Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5

Copyright(C) 2003-04 Intel Corporation All Rights Reserved.

4. Recover Volume Options

2. Delete RAID Volume

5. Acceleration Options

3. Reset Disks to Non-RAID 6. Exit

RAID Volume :

ID

Name

Level Stripe

Size Status Bootable

0

TryRAID5

RAID5(Parity) 64KB 149.1GB

Normal

Yes

Physical Disks:

Port Drive Model

Serial #

Size Type/Status(Vol ID)

0

Hitachi HDS72161

PVF904Z21G2JZM

149.0GB

Member Disk(0)

1

ST380811AS

5PS1TAGW

74.5GB

Member Disk(0)

2

SAMSUNG HD161HJ S0V3J9APA30524

149.0GB

Member Disk(0)

3

ST380815AS

5RW1CA37

74.5GB

Non-RAID Disk

Intel(R) Rapid Storage Technology - Uption ROM - 11.0.8.1204

Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.

[

DISK/VOLUME INFORMATION

]

[

MAIN MENU

]

1. Create RAID Volume

[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu