Foxconn Z75M-S - Manual (Page 42)

► Write to Read Delay (tWTR)
This item allows you to set minimum Write-to-read delay (in clock cycles).
► Active to Active Delay (tRRD)
This item allows you to set Active to Active Delay (in clock cycles).
► Read CAS# Precharege(tRTP)
This item is used to set the read CAS to precharge time (in clock cycles).
►Four Active Window Delay(tFAW)
This item is used to set the four active window delay time (in clock cycles).
Voltage Configuration
Security Main Boot OC plus Save&Exit Advanced
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
The minimum available for
adjustment is 1.307V.
The maximum available for
adjustment is 2.006V.
The default voltage is
1.553V.
Adjusting the voltage
beyond the memories
default voltage could
result in damage to memory
controller.
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Voltage Configuration
DRAM Voltage [Default]
CPU VSA Voltage [Default]
PCH Core Voltage [Default]
CPU VTT (Uncore) Voltage [Default]
CPU VCore Voltage offset [Default]
► DRAM Voltage
This item is used to set the DRAM voltage. The maximum available for adjustment is 1.307V.
Adjusting the voltage beyond the memories default voltage could result in damage to
memory controller.
► CPU VSA Voltage
This item is used to set the CPU VSA voltage.
► PCH Core Voltage
This item is used to set the PCH Core voltage.
► CPU VTT (Uncore) Voltage
This item is used to select the CPU VTT (Uncore) voltage. [Default] means the voltage is
according to your CPU model.
► CPU VCore Voltage Offset
This item is used to set the CPU VCore power Voltage offset.
BIOS SETUP
35