Usb configuration – Foxconn Z75M-S User Manual

Page 36

► Spin up Device(Appears when “SATA Mode” is set to [AHCI])

This item is used to select if the SATA controller supports staggered spin-up on its ports,
for use in balancing power spikes. This value is loaded by platform BIOS prior to OS
initialization.

USB Configuration

Security

Main

Boot

OC plus

Save&Exit

Advanced

Enable/Disable ALL USB

Devices

→ ←: Select Screen

↑ ↓/Click: Select Item

Enter/Dbl Click: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC/Right Click: Exit

USB Configuration

USB Devices Support

[Enabled]

USB 3.0 Devices Support

[Enabled]

Legacy USB Configuration

Legacy USB Support

[Enabled]

► USB Devices Support

This item is used to enable or disable all USB Devices.

► USB 3.0 Devices Support

This item is used to enable or disable all USB 3.0 Devices.

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to enabled.
[Enabled]: This option will enable the legacy USB support.
[Disabled]: This option will keep USB devices available only for EFI applications.
[Auto]: This option will disable the legacy support if no USB devices are connected.

BIOS SETUP