Foxconn Z75M-S - Manual (Page 91)

RAID CONFIGURATION
84
4. After exiting from " RAID Level", it goes directly to "Stripe Size" item. Because all four disks
are elected for RAID10, so there is no need to go to Disks option.
5. Use Up or Down arrow key to select the desired strip size when entering “ Strip Size” menu.
The default value is 64K.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
The following are typical values:
RAID0 - 128KB
RAID10 - 64KB
RAID5 - 64KB
Intel(R) Rapid Storage Technology - Uption ROM - 11.0.8.1204
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
TryRAID10
RAID10(RAID0+1)
Select Disks
128K
149.1 GB
N/A
Create Volume
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
[ HELP ]
64KB
[ CREATE VOLUME MENU ]
6. In “ Capacity” item, use the default value, and press . The default value is twice the
smallest hard disk size, that is, 74.5GB * 2 = 149GB.
7. Select “
Create Volume” and press . A warning message will appear:
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Press to create the volume and return to the main menu.