Hardware monitor – Foxconn Z75M-S User Manual

Page 43

Hardware Monitor

Security

Main

Boot

OC plus

Save&Exit

Advanced

Enables a warning message

once the case intrusion

alert has been triggered

→ ←: Select Screen

↑ ↓/Click: Select Item

Enter/Dbl Click: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC/Right Click: Exit

Hardware Monitor

Case Intrustion Alert

[Disabled]

CPU FAN Mode

[Automatic Mode]

FAN Off Temp Limit

FAN Start Temp Limit

FAN Start PWM

PWM Slope Setting

[0.5 PWM]

CPU Temperature

: +55 C

CPU FAN Speed

: 663 RPM

System FAN Mode

[Automatic Mode]

FAN Off Temp Limit

FAN Start Temp Limit

FAN Start PWM

PWM Slope Setting

[0.5 PWM]

System Temperature

: +41 C

System FAN Speed

: N/A

▶ Hardware Voltage Monitor

► Case Intrustion Alert

This item is used to enable or disable case open warning function.

► CPU FAN Mode / System FAN Mode

These item are used to select the mode of CPU FAN / System FAN. The default option is:
[Automatoc Mode].

► FAN off Temp Limit
It allows you set a temperature value from which smart fan stop its operation.
► FAN Start Temp Limit
It allows you set a temperature value from which smart fan starts its operation.
► FAN Start PWM
It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
value and smart fan begins its operation. The higher PWM value can achieve the faster fan
speed.
► PWM Slope Setting
It controls the PWM value being stepped up or down versus temperature changes.
► CPU Temperature
These items show the current CPU temperature detected automatically by the system.
► CPU FAN Speed
This item shows the current CPU FAN speed detected automatically by the system.
► System Temperature
These items show the current System temperature detected automatically by the system.
► System FAN Speed
This item shows the current System FAN speed detected automatically by the system.
► Hardware

Voltage Monitor

Press to go to relative submenu.

BIOS SETUP