Foxconn Z75M-S - Manual (Page 19)

Installing a Memory
If you take a look at front side of memory module, it has asymmetric pin counts on both sides
separated by a notch in the middle, so it can only fit in one direction. Follow the steps below to
correctly install your memory modules into the sockets.
Step 1:
Spread the clips at both ends of the memory
socket. Place the memory module onto the socket,
then put your fingers on top edge of the module,
and push it down firmly and seat it vertically into
the memory socket.
Step 2:
The clips at both ends of the socket will snap into
place when the memory module is securely
inserted.
96-Pin
144-Pin
Notch
HARDWARE INSTALLATION
12