Foxconn Z75M-S - Manual (Page 41)

Memory Configuration
Security Main Boot OC plus Save&Exit Advanced
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
The selection of
Performance Memory
Profiles which impacts
memory sizing behavior.
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Memory Configuration
Memory Information
Memory DIMM1 Not Present
Memory DIMM2 Not Present
Memory DIMM3 Not Present
Memory DIMM4 2048 MB (DDR3 1333)
Total Memory Size 2048 MB (DDR3 1333)
Performance Memory Profiles [Automatic]
XMP Profiles 1 Not Supported
XMP Profiles 2 Not Supported
► Performance Memory Profiles
This item is used to select Performance memory profile.
Options: [Automatic], [Manual], [XMP Profile 1], [XMP Profile 2].
[Automatic]- Configuration database of using performance memory profile.
[Manual]- Configuration database of using performance memory profile. The next submenu
will apear when select this item.
[XMP Profile 1]-Configuration database of using XMP timing profile 1.
[XMP Profile 2]- Configuration database of using XMP timing profile 1.
The following items appear only when the option is set to “Manual”.
► Memory Clock Multiplier
This item is used to set the memory clock multiplier.
► Memory Multiplier
This item is used to set the memory multiplier ratio.
► CAS# Latency(tCL)
This item dispalys the CAS Latency time. The CAS Latency is the number of clock cycles
that elapse from the time the request for data is sent to the actual memory location until the
data is transmitted from the module.
► Row Precharge Time(tRP)
This item dispalys the DRAM RAS precharge time (in clock cycles).
► RAS# to CAS# Delay(tRCD)
This item dispalys the delay time (in clock cycles) between the CAS and RAS strobe signals.
► RAS# Active Time(tRAS)
This item dispalys the precharge delay time (in clock cycles).
► Write Recovery Time(tWR)
This item allows you to select the write recovery time (in clock cycles).
► Row Refresh Cycle Time(tRFC)
This item allows you to select the minimum refresh recovery time (in clock cycles).
BIOS SETUP
34