Foxconn Z75M-S - Manual (Page 33)

Chipset Configuration
Security Main Boot OC plus Save&Exit Advanced
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Select which of
IGFX/PEG/PCI Graphics
device should be Primary
Display Or select SG for
Switchable Gfx.
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Chipset Configuration
Primary Display [Auto]
Integrated Graphics [Auto]
Aperture Size [256MB]
GTT Size [2MB]
ME Flash Write Protected [Enabled]
▶ Intel(R) Rapid Start Technology
► Primary Display
This item is used to select which graphics controller is used as the primary boot device.
► Integrated Graphics
This item allows you to determine whether to allocate memory for the integrated graphics
controller from the system memory.
► Aperture Size
This item is used to select the aperture size.
► GTT Size
This item is used to select the GTT size.
► ME Flash Write Protected
This item is used to enable or disable the ME flash write protected control.
► Intel(R) Rapid Start Technology
This item is used to enable or disable the Intel(R) Rapid Start Technology.
BIOS SETUP
26