Foxconn Z75M-S - Manual (Page 17)

Install the CPU Cooler
Follow the steps below to correctly install the CPU cooler on the motherboard.
1. Apply and spread an even layer
of thermal grease on the surface of
the CPU.. 2. Place the four bolts of the
CPU cooler to the holes of the
motherboard, push them straight
down from the top, and the bolts will
be fastened on the motherboard.
3. Check the solder side of the
motherboard, the push pin should
be fixed as depicted in the picture.
3
2
1
4. Attach the 4-wire CPU cooler
connector to the CPU FAN header
on the motherboard.
Release bolts of CPU cooler from
motherboard:
1.Turning the push pin (bolt)
along with the direction of arrow
(counterclockwise).
2. Pull the push pin straight up.
3. Turning push pin clockwise to its
default position.
3
2
1
Use extreme care when removing the CPU cooler because the thermal grease may
adhere to the CPU. Incorrectly removing the CPU cooler may damage the CPU.
HARDWARE INSTALLATION
10