Usb charger, Setup guide, Appendix 101 – Foxconn Z75M-S User Manual

Page 108

Security

Main

Boot

OC plus

Save&Exit

Advanced

Select ACPI sleep state

the system will enter when

the SUSPEND button is

pressed.

→ ←: Select Screen

↑ ↓/Click: Select Item

Enter/Dbl Click: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC/Right Click: Exit

ACPI Configuration

ACPI Sleep State

[S3]

Restore on AC Power Loss

[Power Off]

Deep Sleep Mode

[Enabled]

Resume by RTC

[Disabled]

Wake on USB Device

[Enabled]

Wake on PCI/PCIe device

[Enabled]

Wake on PS/2 KB from S1 and S3

[Enabled]

APPENDIX

101

USB Charger

If your Operating System does not support charging mode, USB Charger can provide you addi-
tional convenient way to support the USB battery charging function. With this, you can charge
devices that comply with the BC1.2 specifications, such as iPad, iPod, iPhone, etc.

Setup Guide

1. Make sure that “Deep Sleep Mode” in BIOS is set to “Disabled”, and that “USB Standby
Power” is set to “Enabled”.

2. Connect the USB header (F_USB2) correctly, then you can use the front expansion USB port
to charge up your devices when your system is in ACPI S3, S4 or S5 state.

If there are system state transitions during charging, such as S5 to S3 and so on,
the devices must be re-plugged to continue the charging process.