Dynex DX-E401 - Manual (Page 9)

9
Hardware Description (continued)
Rear Panel:
Used to restore the DX-E401 back to factory default
settings.
LAN port sockets (Cat-5 Ethernet RJ-45 cable). The LED
glows steadily when a port is connected to a hub, switch
or network-adapter-equipped computer in your local area
network (LAN.)
WAN port socket (Cat-5 Ethernet RJ-45 cable). This is
where you will connect your Cable or DSL modem.
Connect one end of your included power adapter to the
power port and the other end into your power outlet.
Reset
LAN Ports
1-4*
WAN*
Power
*All ports (both LAN & WAN) are Auto-MDIX. All ports auto-sense cable types
to accommodate Straight-through or Cross-over cable.
WAN Port LAN Ports Power Reset